Specifications

HID OMNIKEY MIFARE® Easy Reader Boards

 

Host interface:

  • RS232 (Reader Board with RS232)
    CMOS-TTL (Reader Core)
  • RF Transmit Frequency - 13.56 MHz
  • Power Supply:
    5 VDC ± 10% regulated

Contactless (RFID) Smart Card Interface:

  • ISO 14443 A
  • Supported Tag-ICs: MIFARE Standard MIFARE 4k MIFARE Pro X MIFARE Ultralight MIFARE DESFire (Serial No.only) SLE66R35 SLE44R35, ISO 14443A Tags
  • RF transmission speed 106 kBit/s

Hardware Specifications:

  • Dimensions (LxWxH):
    25.5 x 30.0 x 4.8mm (1.00” x 1.18” x 0.19”) – Reader Core
    117.0 x 67.0 x 15.00mm (4.6” x 2.64” x 0.59”) - Reader Board
  • Operating Temperature – -20 to +80 C / -4 to +176 F
  • Storage Temperature – -40 to +85C / -40 to +185 F

Comments

Post a Comment

Popular posts from this blog

Image
RFID systems operate across various frequency ranges and types, each with distinct characteristics and applications.  Below is an overview of the main types of frequencies: 1. Low Frequency (LF) RFID: Frequency Range:  30 kHz to 300 kHz (typically 125 kHz or 134 kHz) Read Range:  Short (up to 10 cm) Characteristics: Lower data transfer rates. Good penetration through non-metallic materials. Less susceptible to interference from water or metal compared to higher frequencies. Lower cost. Applications: Access control. Animal tracking. Industrial applications. 2. High Frequency (HF) RFID: Frequency Range:  3 MHz to 30 MHz (typically 13.56 MHz) Read Range:  Short to medium (10 cm to 1 m) Characteristics: Moderate data transfer rates. Moderate sensitivity to interference. Widely used in smart card applications. Applications: Contactless payment systems (NFC). Electronic ticketing. Access control. Smart cards (MIFARE) . 3. Ultra-High Frequency (UHF) RFID: Frequency Ran...
Read more

What is a thermal transfer printer?

Image
Thermal transfer refers to a printing method that utilizes a ribbon. Ink is transferred from the ribbon to the material being printed on. In contrast, direct thermal printing takes place directly on a substrate rather than using a ribbon, which constitutes the primary distinction between these two printing techniques. Thermal transfer technology is frequently utilized by businesses that require extensive barcode labeling and alternative labeling solutions. The images generated by this printer type are characterized by high resolution and durability across various environments. The thermal transfer printing procedure takes place when the components within the thermal printhead generate heat, which melts the thermal transfer ribbon (TTR) ink. This melting process facilitates the transfer of ink onto the substrate, resulting in the creation of the intended image 4-inch Thermal Desktop Printer Typically, the ink contained in the ribbon is composed of wax, resin, or a wax-resin blend. The s...
Read more

Fingerprint Reader Digitalpersona 5300

Image
  The HID DigitalPersona 5300 Fingerprint Reader, offered by Nedo Corporation, is a premier optical scanner designed to comply with FBI PIV and Mobile ID FAP 30 standards. This compact device is specifically engineered for high-volume civil ID and commercial authentication applications, providing outstanding reliability. Its glass platen, rated IP64, is resistant to both chemical and physical damage, rendering it suitable for use in challenging environments. Tailored for large-scale deployments, the DigitalPersona 5300 guarantees rapid and secure identification, establishing it as a reliable option for rigorous authentication requirements. How to use digital persona 4500 finger print reader? Fingerprint Reader Digitalpersona 5300 HID Digital Persona 5300 Module TC710 Fingerprint Reader What is the EikonTouch TC710 fingerprint reader? The EikonTouch TC710 USB capacitive silicon fingerprint reader has a  compact design with improved finger guide ergonomics for ease of use . The ...
Read more